Build your own SLA / DLP 3D Printer
Let's start with the system that will hold the resin vat.
If you chose the FlexVat as the resin container, follow this and the 2b chapters. .
In what follows we are going to assembly the system that allows to break the vacuum forces produced by the resin curing at the vat.
Assembly the base in where you the FlexVat will be placed.
Materials90x90 mm First Surface Mirror Mirror stand melamine piece 6x M3x20 Polyamide screwa 6 x M3 Polyamide nuts 3 x Polyamide washersTools Basic:Slotted ScrewdriverCan be [...]